Warn 9.5ti Portable Winch - #65735
The 9.5ti Multi-Mount packs 9500lbs of portable pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation.
The 9.5ti Multi-Mount includes winch, ti remote, carrier, 7.5' power lead with quick connect plug for front of vehicle and hawse fairlead. Front receiver and rear power lead sold separately.
| 9.5ti MULTI-MOUNT SPECS/PART NUMBERS |
| Part Number: PN 65735, PN 67912 for the H2 Hummer |
| Rated Line Pull: 9500 lbs. (4310 kgs) single-line |
| Motor: Gen II, Series WoundTM |
| Remote Control for PN 65735: Remote switch, 12' (3.7m) lead |
| Remote Control for PN 67912: Remote switch, 12' (3.7m) lead, thermometric indicator, S2 elements, integrated flashlight |
| Geartrain: 3-Stage Planetary |
| Gear Ratio: 156:1 |
| Lubrication: Aeroshell #17 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 112 lbs. (51 kgs.) |
| Wire Rope: 125', 5/16" diameter (30m, 8mm diam.) |
| Fairlead: Hawse |
| Recommended Battery: 650 CCA minimum for winching |
| Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug |
| Finish: Chromate with High-gloss Powder Coat |
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
62(18.9) |
47 amps |
1/9500(4313) |
| 2000(910) |
16.3(4.97) |
160 amps |
2/8650(3927) |
| 4000(1810) |
11.8(3.60) |
230 amps |
3/7920(3595) |
| 6000(2720) |
9.31(2.84) |
305 amps |
4/7400(3359) |
| 8000(3630) |
7.59(2.31) |
370 amps |
5/6940(3150) |
| 9500(4310) |
6.67(2.03) |
425 amps |
|
| Above performance specs are based on first layer of drum |
|
|
)
