This bracket allows the mounting of the popular Bussmann 15300 series of RTMR modules in 2007+ FJ cruisers and 2010+ 4Runners. Depending on the configuration, these modules offer up to 20 fused circuits or a combination of 5 micro relays and 10 fuses. A pre-wired RTMR module is available for those who do not wish to build up their own.
The CNC bent and black powder coated bracket can accommodate any of the 15300 series of modules, as well as a single Bussmann 285 series circuit breaker. The bracket is completely bolt on and mounts on the driver side fender well using existing mounting points.
Some vehicles equipped with the factory inverter will have a relay module in the location where this unit mounts. The factory module can be turned sideways and mounted under the fuse block with a simple bracket, or it can be relocated. The bracket is not a simple bolt on in these cases due to the interference with the factory module. Please check before ordering.
Note that the photo shows the bracket with optional Bussman module installed.
Optional Pre-Wired Bussmann RTMR Module
This kit includes the following:
This kit includes a pre-wired Bussman RTMR module with 10 fused accessory circuits, 5 of which are relay operated. All wiring is properly terminated and sealed, with automotive grade TXL cross-linked wire used throughout. This wire has a 125C insulation temperature rating and is specifically designed for automotive use where it may come into contact with high temperatures and oil. Generous 10ft pigtails are supplied to reduce splicing and provide the user with enough wire of the correct type to complete the installation.
- Bussmann RTMR Module
- 5 ISO 280 Micro Relays Rated at 35A
- 5 18AWG x 10FT Control Wires For the Relay Circuits
- 5 12AWG x 10FT Relay Output Pigtails (Max Suggested Fuse Rating 30A)
- 5 14AWG x 10FT Fused Output Pigtails (Max Suggested Fuse Rating 15A)
Fuses are not included and should be sized according to the accessories being run.