Shop by Brand


Cascadia 4x4 VSS System 100 Watt Hood Solar Panel


$683.99


The Cascadia 4x4 VSS System™ hard-mounts to the hood of your Toyota FJ Cruiser and, during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded.The VSS Systemis completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.

We chose the most stable and durable multilayered semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.

The Cascadia 4x4 VSS System™ is currently in use in the Canadian mining industry.

The future of vehicle charging is here. 

BENEFITS

- Keep your FJ Cruiser battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the job site for work lights and charging cordless tools. 

- Extend the life of your battery: The Cascadia 4x4 VSS System™ will give you longer overall battery life by tending it constantly during periods of sun exposure. 

- Emergency engine starting device: If you ever manage to completely drain your battery the VSS System™ will start the vehicle up again in as little as 30 minutes depending on sun exposure. 

- Anti-glare device: Due to its light-absorbing properties the solar panel creates a surface with very low reflectivity across the hood of the vehicle. 

FEATURES

- 90 watts of energy on the hood of your Toyota FJ Cruiser from a solar panel that's only 3mm thick, meaning vehicle aerodynamics are not affected and the weight of the system is negligible.

-Durable marine-grade solar panel construction. The panel is made from 8 laminated layers consisting of a Dupont™ Tedlar® backsheet and high-tech polymers allowing it to stand up to harsh environmental conditions like rain/snow/ice/mud/rocks/sticks etc. High durability makes this panel perfect for an off-road vehicle. 

- OptionalPlug-and-play MPPT solar charge controller. This waterproof unit mounts in the engine bay and is highly resistant to heat and vibration. It automatically controls how much electricity reaches the battery and prevents overcharging. The charge controller has been pre-wired with fuses, terminals, and connectors to take out all of the guesswork in setting up the VSS System™. 

- The optional but highly recommended custom cut vinyl base sheet protects the underlying vehicle paint from damage. 

- Factory-like appearance. The VSS System™ follows the contours and edges of the FJ's hood perfectly giving it a seamless and sleek aesthetic.

- We add strips of3M neoprene foam to the base of each panel. This high-density foam acts as a thermal barrier to protect your vehicle's paint from damage and also aid in solar panel cooling. 

- Final assembly and quality control is done at our Canadian production facility to ensure that every VSS System™ functions perfectly. At Cascadia 4x4 we stand behind the quality of our products. 

HOW DOES IT MOUNT?

Each panel comes with a full perimeter of pre-installed high temperature3M VHB tape. We spend time sanding, cleaning, and prepping each panel to make sure that the tape has a solid bond to the panel. This tape then mounts safely to your hood without damaging the paint.

We highly recommend that the Cascadia 4x4 VSS System™ is paired with our vehicle specific vinyl base sheet which sits under the solar panel. The vinyl mounts onto the hood of your vehicle in the same way that traditional hood vinyl or automotive vinyl stickers are applied. The vinyl acts as a moisture and debris barrier to protect the underlying paint.

Note: The VSS System™ takes 1.5 hrs to install and must be done in a dry environment between 18° and 35°C (64° and 95°F).

Specifications

Power 100W
Voc 22.6V
Vmp 19V
Isc 6.0A
Imp 5.26A

HOW DOES IT MOUNT? 

Each panel comes with a full perimeter of pre-installed high temperature3M VHB tape. We spend time sanding, cleaning, and prepping each panel to make sure that the tape has a solid bond to the panel. This tape then mounts safely to your hood without damaging the paint. We highly recommend that the Cascadia 4x4 VSS System™ is paired with our vehicle-specific vinyl base sheet which sits under the solar panel. The vinyl mounts onto the hood of your vehicle in the same way that traditional hood vinyl or automotive vinyl stickers are applied. The vinyl acts as a moisture and debris barrier to protect the underlying paint. Note: The VSS System™ takes 1.5 hrs to install and must be done in a dry environment between 18° and 35°C (64° and 95°F).

WILL ENGINE HEAT AFFECT THE VSS SYSTEM? 

This is the most commonly asked question about our VSS systems. It is a fact that solar cells lose efficiency as they warm up, however, the simple answer is NO, engine heat will not have an effect on how our VSS system operates. 

Why you ask? Well, the main benefit to the VSS system is that it provides power to your vehicle battery when the engine is NOTrunning (and therefore not hot). When the engine is running (and hot), the vehicle's alternator is doing the majority of the charging not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.

In order to help with heat build-up, each VSS panel is prepped with closed-cell neoprene on the back of the panel. This serves two purposes: it lifts the panel up off the hood creating an air pocket between the panel and the hood to allow for cooling, while also helping to protect the vehicle hood from any contact with the back of the panel. 

WILL THE VSS SYSTEM WORK WITH MY BATTERY? 

The MPPT charge controller included in our complete kits is programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid, and Gel Cell type batteries. 

*We do not recommend the use of Optima batteries with the VSS systems. 

CAN IT BE REMOVED? 

Once installed the VSS system is not designed to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. ie. the panel needs to be replaced.

  • Model: CHF123C
  • Manufactured by: Cascadia4x4

Be the first to write a review.  Write a Review.

Customers who bought this product also purchased...



Manufacturer Discounts

Save 18% on all MBRP
MBRP

Manufacturer Info

Have you seen ...

Fourtreks

PayPal Credit

Your IP Address is: 18.97.9.170