Shop by Brand


K4R Stud Mount with 1.25 in. Bolt


$5.49


The importance of the stud mount cannot be over-stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end up with unneeded loss. And if that isn't enough, the stud mount must be strong enough to withstand all of the stress placed upon it from an antenna that is subject to severe wind load and vibration.

Firestik stud mounts have become the standard of our industry. This wasn't by accident. It was because users learned to appreciate their outstanding design and material quality. Instead of inexpensive aluminum, we use chrome-plated machine brass. Instead of 9/16" (14mm) hex-stock, we use 5/8" (16mm) stock. Instead of ABS or inferior plastic insulators, we use nylon. Instead of cadmium plated hardware, we use stainless steel. Furthermore, our heavy-duty 3/8" center shanks can mean the difference between trouble-free use and lost antennas.

The design of the FireRing coax termination requires the 1.25" mounting bolt that is found in the K-4R stud mount.

  • Model: K4R
  • Manufactured by: FireStik

Be the first to write a review.  Write a Review.



Manufacturer Discounts

Save 18% on all MBRP
MBRP

Manufacturer Info

Have you seen ...

Fourtreks

PayPal Credit

Your IP Address is: 18.97.14.88