Shop by Brand

Metal Tech FJ Cruiser/4Runner Rear Long Travel Coil Springs Heavy


 Sold Out 

This part is subject to availability and ships directly from the manufacturer.

Metal Tech 4x4 FJ Cruiser/4Runner (2003-current) rear long travel progressive rate heavy coil spring.

This progressive rate spring will give you a total of 27" of articulation when combined with our custom made FJ Cruiser/4Runner Icon 2.0 VS Series Shocks, FJ Cruiser Rear Extended Brake Lines, and Metal Tech 4x4 3" Bump Stop Drops Extensions. When we first installed our Total Chaos FJ Cruiser 2" Long Travel Kit we were so impressed with the increased suspension travel and ability to fly through the whoops at high speed the rear axle couldn't keep up! One of the biggest disadvantages of the FJ Cruiser is the limited suspension travel. With Metal Tech 4x4's long history of specializing in the Toyota FJ40 Land Cruiser we took our rock crawling knowledge and set out to make the FJ Cruiser a more capable trail rig.

Since Toyota does not capture the coil spring the suspension travel is limited to the free height of the spring (ie the total length of the spring) before the spring will fall out of the coil buckets. By creating the dual rate spring we have the bottom half the spring do all the suspension work and the top half stays fully collapsed at ride height. When the suspension starts to cycle downwards the top half of the spring starts to open up allowing for greater suspension travel over a standard 2" lift spring.

Metal tech 4x4 Next Gen dual rate Long Travel rear springs. We have taken the knowledge and performance we have gained over the past 5yrs of our long travel systems and wrapped it into the single best performing Next Gen spring to date. We have increased the available height up by 1" over our first generation spring. The Next Gen spring has increased load capacity similar to our previous HD springs, however it maintains the ride and comfort of our previous Med spring even with the lightest loaded trucks due to the new dual rate build.

Now Right and Left specific. These are the only rear springs on the market for the FJ Cruiser/4 Runners and Prado 120 platform trucks that are engineered as LEFT and RIGHT rear springs. Specifically engineered for North America Left hand drive vehicles each spring has a different spring rate to counter the common lean most Prado 120 platform trucks experience when lifted. This is especially helpful for heavily loaded trucks with rear bumper systems, drawer systems etc. However still very visible if not more so with lightly loaded trucks. The drivers spring is marked 4005-D and packs a 3% difference over the passenger side.

Next Gen Spring Specs:

  • Free Length - 19.25 inches
  • Top Coil Rate - 104 lbs
  • Bottom Coil Rate - 300lbs
  • Total lift height 3 inches

  • Model: MT-GSJ-4052
  • Manufactured by: Metal-Tech

Be the first to write a review.  Write a Review.

Manufacturer Info

Have you seen ...


PayPal Credit

Your IP Address is: