Shop by Brand


Toyota 8", 4.56, 29 Spline, Nitro Ring & Pinion 2007-2009


$288.74


Toyota FJ 8"
4.56 Nitro Ring & Pinion


Fits:
Front
1979-1985 Pick-up (U.S.) 1979-1997 Hilux solid axle (International)
1984-1985 Toyota 4Runner

Rear
2012-2016 Scion FR-S
2012 & Newer Subaru BRZ
2012 & Newer Toyota 86
1979-1995.5 Pick-up 4x4 (U.S.)
1979-2004 Hilux 4x4 (International)
2005-2014 Hilux 4x4 (International) 1984-1995 Toyota 4Runner & Surf
1996-2002 Toyota 4Runner, Surf, Prado 90/95/ 2003-2009 Toyota 4Runner, Prado 120, Lexus GX470 1995.5-2002 Tacoma 4x4 with E-Locker
2003-2014 Tacoma 4x4 with E-Locker 2007-2009 FJ Cruiser Non E-Locker
2007-2009 FJ Cruiser with E-Locker
1985-1998 Land Cruiser II, Bundera LJ/RJ/KZJ 70/71/73/78 1998-2005 Lexus IS300

Differential: Toyota 8" V6 & 4CYL
Gear Ratio: 4.56
Tooth Count: 41/9
Pinion Splines: 29
Ring Gear Bolts: 10 (not included)
Manufacturer: Nitro Gear & Axle
Warranty: 2 Years

Tech Note:
Refer to Fits tab for info on required yokes and Master Install Kits.

In 2003 Toyota switched the 8" gear set from 27 to 29 spline pinions. Nitro 'TV6' 8" gears were designed from the beginning with a 29 spline pinion. As a result Nitro is currently the only company offering factory correct pinion splines for 2003 & newer 8" Fits. As an added benefit all 2002 & older Fits can now be upgraded to the superior 29 spline with our YOKTOYFITKIT-29 The FITKIT contains a new, 29 spline flange, a new pinion seal and a new pinion nut.
Nitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC triple-lapped and Rockwell tested for hardness. These extra steps ensure excellent fitment, ideal contact pattern and smooth, quiet operation.

  • Vehicle Applications:

  • Front
  • 1979-1985 Pick-up (U.S.), Req. YOKTOYFITKIT-29, Use MKT8-B*
  • 1979-1997 Hilux solid axle (International), Req. YOKTOYFITKIT-29, Use MKT8-B*

  • 1984-1985 Toyota 4Runner, Req. YOKTOYFITKIT-29, Use MKT8-B*


  • Rear
    2012- 2016 Scion FR-S, use with Master install Kit MKTLC100-IFS, solid spacer SKCSTV6, and Yoke fit kit YOKTOYFITKIT-29.
    2012 & Newer Subaru BRZ, use with Master install Kit MKTLC100-IFS, solid spacer SKCSTV6, and Yoke fit kit YOKTOYFITKIT-29.
    2012 & Newer Toyota 86, use with Master install Kit MKTLC100-IFS, solid spacer SKCSTV6, and Yoke fit kit YOKTOYFITKIT-29.

  • 1979-1995.5 Pick-up 4x4 (U.S.), Req. YOKTOYFITKIT-29, 4 Cyl. Use MKT8-B*, V6 Use MKTV6-B**
  • 1979-2004 Hilux 4x4 (International), Req. YOKTOYFITKIT-29, 4cyl. Use MKT8-B*, V6 Use MKTV6-B**
  • 2005-2014 Hilux 4x4 (International), Use MKTV6-B**

  • 1984-1995 Toyota 4Runner & Surf, Req. YOKTOYFITKIT-29, 4 cyl. Use MKT8-B*, V6 Use MKTV6-B**
  • 1996-2002 Toyota 4Runner, Surf, Prado 90/95/, Req. YOKTOYFITKIT-29, Use MKTV6-B**
    2003-2009 Toyota 4Runner, Prado 120, Lexus GX470, Use MKTV6-B**

  • 1995.5-2002 Tacoma 4x4 with E-Locker, Req.YOKTOYFITKIT-29, Use MKT8-ELOC-B***
  • 2003-2014 Tacoma 4x4 with E-Locker, Use Use MKT8-ELOC-B

  • 2007-2009 FJ Cruiser Non E-Locker, Use MKTV6-B
  • 2007-2009 FJ Cruiser with E-Locker, Use Use MKT8-ELOC-B

  • 1985-1998 Land Cruiser II, Bundera LJ/RJ/KZJ 70/71/73/78, Req. YOKTOYFITKIT-29, 4cyl. Use MKT8-B*
    (KZJ Use MKTV6-B**)

    1998-2005 Lexus IS300, Req. YOKTOYFITKIT-29, Use MKTLC100-IFS

    TV6 gears will not work in South American built Dana 200mm 3rd members (these have side shims, not the typical adjuster nuts for carrier bearings. Call JT's for more info.

Ships Free

  • Model: TV6-456-29-NG
  • Manufactured by: Nitro Gear & Axle

Be the first to write a review.  Write a Review.

Customers who bought this product also purchased...



Manufacturer Info

Have you seen ...

Free Shipping on all Extreme Outback!

PayPal Credit

Your IP Address is: 3.216.79.60
Be sure to Visit Pure 4Runner!